Using a microphone for sing along, E-20 – Casio PX-400R User Manual

Page 22

Advertising
background image

E-20

Using a Microphone for Sing Along

419A-E-022B

You can connect a microphone to the digital piano to sing along
with built-in tunes, or with playback of SMF data from a memory
card.

Using the Microphone Jack

You can connect a commercially available microphone to the digital
piano’s microphone jack. Before connecting a microphone, set the
MIC VOLUME

knob to a relatively low setting. Next, adjust the

volume to the desired level after connecting the microphone.

1

Set the MIC VOLUME knob to the “MIN” setting.

2

Use the microphone’s switch to turn it on.

3

Use the MIC VOLUME knob to adjust the microphone
volume level.

IMPORTANT!

• You may get static noise in the microphone output if there is an

external device connected to the digital piano’s MIDI terminal.

• Be sure to unplug the microphone from the digital piano when

you are not using it.

Microphone

MIC VOLUME Knob

Lower

Higher

Microphone on/off switch

[Left Side]

● Recommended Microphone Type

Dynamic microphone (standard plug)

● Feedback

Any of the following conditions can result in feedback, which
causes a howling sound to be produced through the speakers.

• Cupping the head of the microphone with your hands.
• Positioning the microphone to close to the speakers.

If howling occurs, hold the microphone by the barrel (not the
head) and move it away from the speakers.

● Noise

Fluorescent lighting near the microphone can cause noise. If
this happens, move the microphone away from the fluorescent
lighting causing the noise.

To sing along with playback

Getting Ready
• Adjust the MAIN VOLUME (page E-6), ACCOMP/SONG

VOLUME

button (page E-13), and MIC VOLUME (page E-20)

to appropriate levels.

1

Find the tune you want in the Song Group List, and
note its number.

• See page A-4 for the Song Group List.

2

Press the SING ALONG button to enter the sing along
mode.

• This causes the SING ALONG button indicator lamp to

light.

3

Select the sing along source.

<Built-in Tune>

Press the SONG/USER button so its indicator lamp is lit.
This is the sing along song mode.

<Memory Card Tune>

Press the CARD button so its indicator lamp is lit. This is
the sing along card mode.

4

Rotate the dial to select the tune you want.

Dial

SING ALONG

ECHO

MIC VOLUME

<PLAY/STOP>

TRANSPOSE/
KEY CONTROL

RHYTHM

PX400R_e_17-28.p65

04.8.24, 4:34 PM

20

Advertising
This manual is related to the following products: