Samsung VR5160 - Manual (Page 11)

VCR Setup
External Stereo Connections (VR8160 only)
Out to Audio System
Connecting your stereo VCR to an external
amplifier and speakers can improve the sound
quality. The sound from the VCR can be heard
through the stereo.
In from Audio System
If you want to record a stereo signal from
external audio equipment, you can send the
audio signal from the stereo to the VCR.
REAR OF VCR REAR OF STEREO
Audio OUT jacks
OUT
ALCtO 1
^
0=010^
video
Left and Right
audio signals
Audio IN jacks
IN O U T
"^^B =I0)L © T
REAR OF VCR REAR OF STEREO
Audio IN jacks Audio OUT jacks
IN Left and Right C X/T
audio signals
©
Plug and Play
The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.
If you use a cable box or DSS® box, plug & play will not function; see pages 9-11.
1
Plug the VCR into the AC outlet.
Don’t press any buttons on the VCR or remote 2 uun L prebb cuiy ui
during auto setup.
3 “AUTO” blinks while the VCR automatically sets
the clock using information provided by the local
PBS channel.
While “AUTO” is blinking, channel memory is also set
automatically.
See page 9 for more information.
4
When Auto Setting has been completed, the VCR
displays the current time. You can now use your
VCR.
ICZ3) ee 1,. _)©e®
-Mil ------------------------- -
.....
i£i_____ ;_____ li
1
1 -t> o ^ Zittii ©©o
: _[
NOTES:
• If the time displayed in step 4 is incorrect, perform the Manuai Clock Set procedure(refer to page 10).
• There are some PBS channels that do not transmit clock setting data. If your antenna cable is properly
connected and is dispiayed, perform the Manual Clock Set procedure(refer to page 10).