Using the sound field mode, Using the auto power link function, Using the tv functions – Samsung HW-C450 User Manual
Page 15: Using the s/w level function, Gid (e
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•i<q
w
l__J liMj L_J
(Sim.
&) dD
JL CDTfCJL VUTE
CM
Q,CD.p
C_J;&cÌjÌLd
GiD (E
j
ÌMJ
__ : v,v:s __
fs.VOL) ( WiJ ]
Using the sound field mode
You can select from 7 different sound field modes (NEWS, DRAMA,
SPORTS, GAME, CINEMA, MUSIC and PASS (Original Sound)) depending
on the type of sources you want to enjoy.
Press
SOUND MODE
on the remote control or touch
SOUND FIELD
MODE
on the front panel repeatedly to select the sound field mode you want.
Sound field
mode
Function
PASS
Select PASS mode if you want to enjoy the original sound.
MUSIC
Select MUSIC mode when you play music sources.
NEWS
Select NEWS mode when you play news sources.
DRAMA
Select DRAMA mode when you play drama sources.
CINEMA
Select CINEMA mode when you play movie sources.
SPORTS
Select SPORTS mode when you play sports sources.
GAME
Select GAME mode when you play game sources.
Using the AUTO POWER LINK function____________
The Crystal Surround Air Track is automatically turned on when you turn the
power on of a TV or any device connected to the Air Track with the optical cable.
Press
AUTO POWER
on the remote control of this unit.
• Auto power link function turns on and off each time you pre
;AUTO
POWER.
AUTO POWER LINK
Display
ON
POWER LINK ON
OFF
POWER LINK OFF
m
z
■
2
z
o
d
o
z
03
If a TV or any device connected to Air Track with the optical
cable is off and there is no digital input, the Air Track is turned
off after 20 minutes.
Using the TV functions
1.
Press
TV POWER
on the remote control of this unit.
2.
Press
TV OH
on the remote control to select the TV channel.
3.
Select one of the sound field mode buttons on the remote control to select
the desired sound field mode.
• The remote control can operate TVs made by SAMSUNG only.
Using the S/W LEVEL function
You can control the base volume with S/W Level key in the Remote control.
1.
Press the
S/W Level
button on the Remote control.
2. “SW 00”
is appeared on the Display.
3.
Press “+” on the
VOL/CONTROL
key if you want to increase the
subwoofer volume. You can set it from SW+01 to SW+06.
4.
Press on the
VOL/CONTROL
key if you want to decrease the
subwoofer volume. You can set it from SW-01 to SW-06.
15