Appendix, Replacing the lamp, Appendix 30 – Samsung HL-$4676S User Manual

Page 130: Appendix replacing the lamp

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Appendix

Replacing the Lamp

Why do I need to replace the lamp?

The lomp used in a DIP TV has a limited lifespan. For the best screen quality it needs to be

replaced periodicoily. After replacing the lamp, the screen quality will be bright and clear as new.

When do I need to replace it?

If should be replaced when the screen becomes darker, less clear or when all three LEDs on the

front (STAND BY/TEMP, LAMP, ond TIMER) are flashing.

Check before lamp replacement

1. The lamp must be the same code number and type.

2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case.

3. After checking the code number for the lamp, give the code number to the store where you

purchosed the TV or to a Samsung Service center.

Caution

1. Replace with the correct code numbered lamp to avoid damage to the TV.

2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot.

3. Do not touch the glass part of the lamp with your bare hands or insert any foreign object inside

the cover as it may cause poor screen quality, electric shock or fire,

4. Do not place the old lamp near flammable objects or within the reach of children.

5. Be sure to connect this TV directly to an AC wall outlet. If the TV's AC plug is connected to a

cable box or other source, it will not allow for proper cool down time.

English - 1 30

Advertising