Craftsman 917.271641 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCELEFWIONTEST-
4. Move throttle control lever from slow to
fast position. If engine hesitates or
dies, turn idle mixture valve
out
(counterclockwise) 1/8 turn. Repeat
test and continue to adjust, if neces
sary, until engine accelerates
smoothly.
High speed stop is factory adjusted. Do
not adjust - damage may result.
IMPORTANT:
Never tamper with the
engine governor, which is factory set for
proper engine speed. Overspeeding the
engine above the factory high speed
setting can be dangerous. If you think the
engine-governed high speed needs
adjusting, contact a Sears or other
qualified service center, which has proper
equipment and experience to make any
necessary adjustments.
Idle Speed
28