Operation – Craftsman C944.511601 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
KNOW YOUR BLOWER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BLOWER ATTACHMENT. ComparG the illustrations with your unit to familiarize
yourself with the location of the various controls and adjustments. Save this
manual for future reference.
Blower Discharge
Opening
Air Intake Opening
i
Hanger
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach
ments to be installed. The optional at
tachments are:
Edger............... ..
71-51157
Cultivator...................... 71-51158
Pruner........................... 71-51161
Brushcutter* ............... 71-51159
*not designed for use with electric
powerheads
WARNING:
Always disconnect
powerhead spark plug (or disconnect
powerhead from power source) before
removing or installing attachments.
REMOVING ATTACHMENT
CAUTION:
When removing or instal
ling attachments, place the unit on a
flat surface for stability.
1
. Loosen the coupler by turning the
knob counterclockwise.
Upper Shaft
DOSEN
TIGHTEN
2. Press and hold the locking/release
button.
Locking/Release
Button
^ Coupler
Lower Attachment
Upper Shaft
While securely holding the upper
shaft, pull the attachment straight
out of the coupler.