Fuel safety, Cutting safety, Transporting and storage – Craftsman C944.511590 User Manual

Page 4: Save these instructions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• Be sure blade stops turning when

engine idles.

• Make carburetor adjustments with

the lower end supported to prevent
the blade from contacting any object.

Hold the unit by hand; do not use the
shoulder strap for support.

• Keep others away when making car­

buretor adjustments.

• Use only recommended Craftsman

accessories and replacement parts.

• Have all maintenance and service

not explained in this manual per­

formed by a Sears Service Centre.

FUEL SAFETY
• Mix and pour fuel outdoors.
• Keep away from sparks or flames.
• Use a container approved for fuel.
• Do not smoke or allow smoking near

fuel or the unit or while using the unit.

• Avoid spilling fuel or oil. Wipe up all

fuel spills before starting engine.

• Move at least 10 feet (3 meters) away

from fueling site before starting engine.

• Stop engine and allow it to cool be­

fore removing fuel cap.

• Remove fuel cap slowly.
CUTTING SAFETY

WARNING:

Inspect the area to

be cut before each use. Remove ob­

jects (rocks, broken glass, nails, wire,

string, etc.) which can be thrown or be­
come entangled in the blade.
• Keep others including children, ani­

mals, bystanders, and helpers at
least 50 feet (15 meters) away. Stop

the engine immediately if you are ap­

proached.

• Always keep engine on the right-

hand side of your body.

• Hold the unit firmly with both hands.
• Keep firm footing and balance. Do

not overreach.

• Keep blade below waist level.
• Do not raise powerhead engine above

your waist.

• Keep all parts of your body away

from blade and muffler.

• Cut from your right to your left.
• Use only in daylight or good artificial

light.

• Use only for jobs explained in this

manual.

TRANSPORTING AND STORAGE

• Stop the powerhead engine before

carrying unit.

• Keep muffler away from your body,
• Allow engine to cool and secure unit

before storing or transporting it in a
vehicle.

• Empty the fuel tank before storing or

transporting the unit. Use up fuel left

in the carburetor by starting the en­

gine and letting it run until it stops.

• Store unit and fuel in an area where

fuel vapors cannot reach sparks or
open flames from water heaters,

electric motors or switches, furnaces,
etc.

• Store unit so the blade cannot acci­

dentally cause injury.

• Store unit indoors, out of reach of

children.

If situations occur which are not cov­
ered in this manual, use care and

good judgment. If you need assis­
tance, call 1-800-235-5878-

SPECIAL NOTICE: Exposure to vibra­

tions through prolonged use of gaso­

line powered hand tools could cause
blood vessel or nerve damage in the

Angers, hands, and joints of people

prone to circulation disorders or abnor­
mal swellings. Prolonged use in cold

weather has been linked to blood ves­

sel damage in otherwise healthy
people. If symptoms occur such as
numbness, pain, loss of strength,
change in skin color or texture, or loss

of feeling in the fingers, hands, or
joints, discontinue the use of this tool

and seek medical attention. An anti­
vibration system does not guarantee

the avoidance of these problems. Us­

ers who operate power tools on a con­

tinual and regular basis must monitor

closely their physical condition and the
condition of this tool.
SAVE THESE INSTRUCTIONS

Advertising