Craftsman 358.795580 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

!f situations occur wtiicti are not cov­
ered in this manual, use care and
good judgment. If you need assis­

tance, contact your Sears Service

Center or call 1-800-235-5878.
OPERATOR SAFETY
• Dress properly. Always wear safety

glasses or similar eye protection

when operating, or performing main­
tenance, on your unit (safety

glasses are available). Eye protec­

tion should be marked Z87.

• Always wear face or dust mask if op­

eration is dusty.

• Always wear heavy, long pants, long

sleeves, boots, and gloves. Wearing
safety leg guards is recommended.

• Always wear foot protection. Do not

go barefoot or wear sandals. Stay
clear of spinning line.

• Secure hair above shoulder length.

Secure or remove loose clothing or
clothing with loosely hanging ties,
straps, tassels, etc. They can be
caught in moving parts.

• Being fully covered also helps pro­

tect you from debris and pieces of
toxic plants thrown by spinning line.

• Stay Alert. Do not operate this unit

when you are tired, iii, upset or un­

der the influence of alcohol, drugs,
or medication. Watch what you are
doing: use common sense.

• Wear hearing protection.
• Never start or run inside a closed

room or building. Breathing exhaust

fumes can kill.

• Keep handles free of oil and fuel.
UNIT / MAINTENANCE SAFETY
• Disconnect the spark plug before

performing maintenance except car­
buretor adjustments.

• Look for and replace damaged or

loose parts before each use. Look

for and repair fuel leaks before use.

Keep in good working condition.

• Replace trimmer head parts that are

chipped, cracked, broken, or dam­
aged in any other way before using

the unit.

• Maintain unit according to recom­

mended procedures. Keep cutting
iine at proper iength.

• Use only Craftsman® replacement

line. Never use wire, rope, string,
etc.

• Instail required shield properly before

using the unit. Use only specified

trimmer head; make sure it is properly

installed and securely fastened.

• Make sure unit is assembled cor­

rectly as shown in this manual.

• Make carburetor adjustments with

lower end supported to prevent line

from contacting any object.

• Keep others away when making car­

buretor adjustments.

• Use only recommended Craftsman

accessories and replacement parts.

• Have al! maintenance and service

not explained in this manual per­

formed by a Sears Service Center.

FUEL SAFETY
• Mix and pour fuel outdoors.
• Keep away from sparks or flames.
• Use a container approved for fuel.
• Do not smoke or allow smoking near

fuel or the unit.

• Avoid spilling fuel or oil. Wipe up all

fuel spills.

• Move at least 10 feet (3 meters)

away from fueling site before start­

ing engine.

• Stop engine and allow to cool before

removing fuel cap.

• Always store gasoline in a container

approved for flammable liquids.

CUTTING SAFETY

^WARNING: inspect the area be­
fore each use. Remove objects

(rocks, broken glass, nails, wire, etc.)

which can be thrown by or become
entangled in iine. Hard objects can
damage the trimmer head and be
thrown causing serious injury.

• Use only for trimming, scalping, mow­

ing and sweeping. Do not use for edg­
ing, pruning or hedge trimming.

• Keep firm footing and balance. Do not

overreach.

• Keep ail parts of your body away from

muffler and spinning line. Keep engine
below waist level. A hot muffler can

cause serious burns.

• Cut from your left to your right. Cutting

on right side of the shield wil! throw de­

bris away from the operator.

• Use only in daylight or good artificial

light.

• Use only for jobs explained in this

manual.

TRANSPORTING AND STORAGE

• Allow engine to cooi before storing or

transporting in vehicle.

• Empty the fuel tank before storing or

transporting the unit. Use up fuel left in
the carburetor by starting the engine
and ietting it run until it stops.

• Store unit and fuel in area where fuel

vapors cannot reach sparks or open
flames from water heaters, electric

motors or switches, furnaces, etc.

Advertising