Service and adjustments – Craftsman 917.257360 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SERVICE AND ADJUSTMENTS
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Figs. 34 and 35)
•
Raise hood.
•
Unsnap headlight wire connector
•
Carefully remove springs from hinge brackets,,
•
Stand at side of tractor. Grasp hood, tilt forward and
lift off hinge brackets.
•
To reinstall, slide hood pivot rod into slot in hinge
brackets, and carefully reinstall hood springs.
24
Advertising