Craftsman 315.113911 - Manual (Page 3)

GENERAL SAFETY RULÉS
READ ALL INSTRUCTIONS
m KNOW YOUR WORKLIGHT. Read operator’s
manual carefully. Learn Its applications and limi­
tations as well as the specific potential hazards
related to this light.
■ USE ONLY RECOMMENDED BATTERY PACK
WITH YOUR WORKLIGHT. Any attempt to use
another battery pack will cause damage to your
worklight and could possibly explode, cause a
fire, or personal injury.
m REMOVE BATTERY PACK FROM WORK-
LIGHT BEFORE REPLACING BULB OR PER­
FORMING ANY ROUTINE MAINTENANCE OR
CLEANING.
■ DO NOT DISASSEMBLE YOUR WORKLIGHT.
■ DO NOT PLACE WORKLIGHT OR BATTERY
PACK NEAR FIRE OR HEAT
They may explode.
Also, DO NOT dispose of a worn out battery
pack by incinerating. Do not incinerate the bat­
tery, even if it is severely damaged or completely
worn out. The battery may explode in fire.
■ DO NOT STORE YOUR WORKLIGHT IN A
DAMP OR WET LOCATION. DO NOT STORE
IN LOCATIONS WHERE THE TEMPERATURE
IS LESS THAN 50°F OR MORE THAN 100°F.
Do not store in outside sheds or in vehicles.
DO NOT PERMIT CHILDREN TO USE WORK-
LIGHT UNSUPERVISED.
It is not a toy. The
temperature of the bulb will become hot after
being on for only a short period of time. This hot
temperature can cause burn injury if touched and
can create sufficient heat to melt some fabrics.
WARNING: if wrapped or in contact with
' fabrics, the worklight lens can produce suffi­
cient heat to melt some fabrics. To avoid serious
personal injury, never allow the worklight lens to
come in contact with anything.
KEEP WORK AREA CLEAN. Cluttered areas
and benches Invite accidents.
AVOID DANGEROUS ENVIRONMENT
KEEP LIGHT DRY, CLEAN, AND FREE FROM
OIL AND GREASE. Always use a clean cloth
when cleaning. Never use brake fluids, gasoline,
petroleum-based products or any strong solvent
to clean your worklight.
STAY ALERT. Watch what you are doing and use
common sense. Do not rush.
CHECK DAMAGED PARTS. Before further use
of this worklight, a part that is damaged should
be carefully checked to determine that it will
operate properly and perform its intended funo-
tion. Do not use worklight if It does not function
properly.