Assembly – Craftsman 486.24545 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
ASSEMBLY
CARTON CONTENTS
1. Mount Bracket Assembly
2. Switch with Wiring
3. Linear Actuator
TOOLS REQUIRED FOR ASSEMBLY
(2) 9/16" Wrenches or Adjustable Wrenches
(2) 3/4" Wrenches or Adjustable Wrenches
PREPARING THE SLEEVE HITCH
• Remove the bolt and nut that attach the lift link to
the sleeve hitch frame. Remove the handle and the
pivot brackets from the sleeve hitch frame. See
figure 1.
ATTACHING THE ELECTRIC ASSIST KIT
• Attach the mount bracket assembly to the sleeve
hitch frame using four 3/8" x 1" hex bolts and 3/8"
nylock hex nuts. See figure 2.
Advertising