Craftsman 1/2 HP GARAGE DOOR OPENER 139.53978SRT - Manual (Page 38)

Accessories
Sears offers many useful accessories for your garage door opener. They are illustrated below with
Sears model numbers and descriptions.
139.53702 Emergency Key Release:
Required\ox
a garage with NO
access door. Enables homeowner
to open garage door manually from
outside by disengaging trolley.
139.53681 SECURITY+ 3-Function Remote
Control:
Includes visor clip.
139.53703 Outdoor Key Switch:
Operates the garage door
automatically from outside when
remote control is not handy.
139.53680 SECURITY* Compact
3-Function Remote Control:
With loop for attaching key ring.
53724 8 Foot Rail Extension
To allow an 8 foot door to open fully.
139.53684
1
SECURITY* Keyless Entry:
Enables homeowner to operate
garage door opener from outside
by entering a 4 digit code on
specially designed keypad.
10 Foot Rail Extension:
To allow a 10 foot door to open fully.
139.53686
R
Plug-In Light Control:
Enables homeowner to turn on a
lamp, television or other appliance
from car, bedside, or anywhere in
the home with a remote.
53589 Support Brackets;
For finished ceilings or where
additional support is required,
based on garage construction.
Includes brackets and fastening
hardware.
139.53709 Door Clearance Brackets:
[For Sectional Doors Oni^
Replaces top brackets and rollers on
door to reduce height of door travel.
For use when installing opener in
garage with low headroom clearance.
41A5281 Extension Brackets:
{Available only through Sears
Parts & Service)
(Optional) For safety sensor
installation onto the wall or floor.
To Add the
We recommend that you program your password
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
If you have a Premium Control Consoie:
1. W ith the door dosed, press the four digit password
desired, then press and hoid Enter.
2. Press and hoid the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener light flashes, release all buttons.
Keyless Entry
if you do not have a Premium Control Console:
1. Choose a 4-digit password using numbers from
0 to 9 (a number can be used more than once, for
example. 4, 0, 4. 1),
Press the four buttons for the password, then
press and rto/tf the Enter button. The indicator light
on the door opener panel will blink.
Press and release the SRT (learn) button on the
opener panel. After the opener light flashes,
release the Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
2
.
3.
38