Install battery {see figs. 5 & 6) – Craftsman 917.256930 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

INSTALL BATTERY {See Figs. 5 & 6)

£k

CAUTION: Do not short battery termi­
nals. Before installing battery, remove
metal

bracelets,

wristwatch

bands,

rings, etc.

Positive

terminal

must

be

connected

first to prevent sparking from acciden­
tal grounding.

■» Lift seat to raised position.

» Open battery box door.

- Be sure drain tube is attached to bottom of battery box

and tube passes through to hole in chassis for proper
drainage,

“ Lower battery into battery box with battery terminals

toward front of tractor.

0

First connect RED battery cable and RED fused igni­

tion wire to positive {+) battery terminal with hex bolt,
flat washer, lock washer and hex nut as shown. Tighten

securely.

o Connect BLACK grounding cable to negative {-) bat­

tery terminal with remaining hex bolt, flat washer, lock
washer and hex nut. Tighten securely.

<■ Close battery box door.

Open battery box door for:

» Inspection for secure connections {to tighten hard­

ware).

» Inspection for corrosion.

» Testing battery,

° Jumping (if required).

° Periodic charging.

Advertising