Powerdrive cable how to mow, Cutting height – Craftsman 917.38919 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power Drive Cable
1. if the drive does not engage when
the powerdttve tever Is pulled
Sewards She handle, screw adjuster
counter-clockwise (K) whilst In
operaSore position.
2., Scraw adjuster in apposite direction
if the powerdrive does not
disengage with the powerdrive lever
free (K).
How to Mow
1.. Start mowing from the outside edge
of the lawn, mowing In strips in
alternate directions (L),
2. Mow twice a week In the growing
season, your lawn will suffer if more
that one third of Its length is cut at
one time and this may also result In
poorcoliaction..
Please Note:-
Do not overload your Lawn mower
When mowing In tong third« grass a first
cut with the cutting height adjusted to Its
highest setting, sea Cutting Height, wilt
help reduce motor overload and will help
prevent damage to your lawn mowar.
PowerDrive Cable
How to Mow
Cutting Height
•
Raise wheels for low cut and lower
wheals for high cut
•
Adjust cutting height to suit your
requirements. Medium position is
best for most lawns.
” The height of cut Is changed by
pulling the adjustment lever away
from the location slots and moving to
the desired position (Wl),
Cutting Height