Operation – Craftsman 358.799341 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
KNOW YOUR ELECTRIC BLOWER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT.
Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
- Top Handle
ON/OFF
Switch ^
Cord
/
Retainer
Air Vents
Air Inlet
Blower Tube
ON/OFF SWITCH
The
ON/OFF SWITCH
is used to
activate the motor.
BLOWER TUBE AND NOZZLE
The
BLOWER TUBE
and
nozzle
are
designed to direct the flow of air.
STOPPING YOUR UNIT
Slide the
on
/
off
switch to the
off
position to stop the unit.
STARTING YOUR UNIT
Slide the
on
/
off
switch to the
on
position to turn on the unit.
WARNING: Do not use the unit
without the blower tubes properly at
tached to avoid flying debris and/or im
peller contact which can cause serious
injury. Always wear eye protection to
prevent rocks or debris from being
blown or ricocheting into the eyes and
face which can result in biindness or
serious injury.
OPERATING POSITION
^WARNING: Inspect the area be
fore using the unit. Remove all debris
and hard objects such as rocks, glass,
wire, etc., that can ricochet, be thrown,
or otherwise cause injury or damage
during operation.
Use your unit as a blower for;
• Sweeping debris or grass clippings
from driveways, sidewalks, patios, etc.
• Blowing grass clippings, straw, or
leaves into piies, or removing debris
from ojrners, around joints, or be
tween bricks.
Direct air flow by directing the blower
tube/nozzle down or to one side. Always
work away from solid objects such as
walks, large stones, vehicles, and
fences.
Clean corners by starting in corners and
moving outward. This will help prevent
an accumulation of debris which could
fly into your face.
Be careful when working near plants.
The force of the air could damage
tender plants.