Blade installation, Servtce and adjustments – Craftsman 987.889000 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SERVtCE AND ADJUSTMENTS
Blade Installation
Blades must be installed perpen
dicular to each other (see Figure
5-17).
Install mower blade as shown in
Figure 5-18 with flat side down.
Install washer on bolt. Tighten
bolts to a torque value of 35 ft.
lbs. (47 Nm).
NOTE; If top bolt is removed, re
install using LOCTITE #242
thread sealant.
t
FRONT
Torque to
Bolt
Torque to
------------35 Ft. Lbs.
Figure 5-18: Blade spindle.
33
Advertising