Craftsman 247.370251 - Manual (Page 10)

OPERATION
T = Obstacles
,
^
Outlet
Start Here
The grass condition at the time of mowing determines
the proper mower cutting height setting for best lawn
appearance. For a healthy lawn, always cut one-third
or less of the total length of the grass at any one cut­
ting.
For extremely heavy cutting, reduce the width of cut.
When mulching under certain conditions, such as very
tall grass, it may be necessary to raise the height of
cut to reduce pushing effort and to keep from over­
loading the engine and leaving clumps of grass clip­
pings. Under heavy conditions cross cut for additional
mulching of surface debris.
When picking up the extension cord,
wind the cord in a series of equal
loops on each side of your hand to
prevent snarling. See illustration at
right.
CUSTOMER RESPONSIBILITIES
GENERAL RECOMMENDATIONS
• Follow the Maintenance Schedule below.
MAINTENANCE SCHEDULE
A
WARNING; BE CERTAIN TO DISCON­
NECT THE POWER SUPPLY BEFORE
PERFORMING ANY REPAIRS OR MAIN­
TENANCE.
SERVICE RECORD
Fill in dates as you
complete regular service
SCHEDULE SERVICEDATES
Every
Use
After
First
Two
Hours
Every
25
Hours
Blade Replaced V
Lubricate Mower V
Cleaning V
V CHECK
LUBRICATION
MOTOR
The motor on your mower does not require lubrication.
WHEELS
DO NOT oil or grease the wheels. Viscous lubricants
will attract dust and dirt that will shorten the life of the
wheels. If you feel the wheels must be lubricated, use
only a dry. silicone type lubricant sparingly.
WHEEL ADJUSTERS
For easy operation, lubricate the wheel adjusters at
least once a season with light oil.
10