Craftsman 917.293310 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Engine Pulley
Cable Clip Screw
I— Drive Control Cabli
Idler Pultey
Transmission Pulley
TINE REPLACEMENT
A
c
AUTION:
Tines are sharp. Wear
gloves or other protection when handling
tines.
A badly worn tine causes your tiller to work
harder and dig more shallow. Most impor
tant, worn tines cannot chop and shred
organic matter as effectively nor buty it as
deeply as good tines. A tine this worn
needs to be replaced.
To maintain the superb tilting perfor
mance of this machine the tines should
be checked for sharpness, wear, and
bending, particularly the tines which are
next to the transmission. If the gap
between the tines exceeds 3-1/2 inches
they should be replaced or straightened
as necessary.
New tines should be assembled. Sharp
ened tine edges will rotate rearward
from above.
transmission
Hairpin Clip
Counter Tine
Rotation
Hairpin Clip
Sharp Edge
Shear Pin
17