How to use your lawn, Mower – Craftsman 917.389010 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SAFETY GLASSES

FORESIGHT IS BEnER

THAN NO SIGHT

The operation of any lawn

mower can result in foreign

objects thrown into the eyes,
which can result in severe
eye damage. Always wear

safety glasses or eye shields while oper­
ating your lawn mower or performing any
adjustments or repairs. We recommend a
standard safety glasses orwide vision safety
mask worn over spectacles.

HOW TO USE YOUR LAWN
MOWER
ENGINE SPEED
Engine speed was set at the factory for

optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

ACAUTION: Federal regulations require

an engine control to be installed on this
lawn mower in order to minimize the risk
of blade contact injury. Do not under
any circumstances attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
• Your lawn mower is equipped with an

operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start
and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels

for high cut, adjust cutting height to suit
your requirements. Medium position is

best for most lawns.
• To change cutting height, squeeze ad­

juster lever toward wheel. Move wheel

up or down to suit your requirements.
Be sure all wheels are in the same set­

ting.

NOTE: Adjuster is properly positioned

when plate tab inserts into hole in lever.
Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the
plate tabs.

LEVER BACKWARD

Plate tab

TO CONVERT MOWER
Your lawn mower was shipped ready to be

used as a mulcher. To convert to bagging
or discharging:

REAR BAGGING
• Lift rear door of the lawn mower and

place the grass catcher frame hooks
onto the door pivot pins.

• To convert to mulching or discharging

operation, remove grass catcher and
close rear door.

Pivot pins

Rear

Grass

SIDE DISCHARGING
• Rear door must be closed.
• Open mulcher door and install dis­

charge deflector under door as shown.

• Mower is now ready for discharging

operation.

• To convert to mulching or bagging

operation, discharge deflector must be
removed and mulcher door must be
closed.

LEVER FORWARD TO RAISE MOWER Lever

8

Advertising