Operation – Craftsman 113.177135 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation
WARNING
To reduco the ri$k of fire or explosion, do not operate this vac in areas with
fiammable gases, vapors or explosive dust in the air. Flammable gases or
vapors include but are not limited to: lighter fluid, solvent type cleaners, oil*
base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but
are not limited to: coal, magnesium, grain or gun powder. Do not vacuum
explosive dust, fiammable or combustible liquids or hot ashes. Do not use this
vac as a sprayer for any flammable or combustible liquid. To reduce the risk
of health hazards from vapois or dusts, do not vacuum toxic materials.
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the vac for extended
hours or when using it in a noisy
area.
The operation of any utility vac can
result in foreign objects being blown
into the eyes, which can result in
severe eye damage. Always wear
safety goggles complying with ANSI
Z87.1 (shown on package) before
commencing
operation.
Safety
goggles are available at Sear retail
stores.
Your Craftsman two~gailon wet/dry vac is
assembled at the factory and ready for use
when you remove it from the carton. The
unit is ready for dry vacuuming or blowing.
After you plug the power cord into the wall
receptacle, turn the unit “ON” by pushing
the switch from position “O” to position
“I”. The symbols used on the switch are
international symbols. The “O” is the
“OFF” position and the “I” is the "ON”
position.
Q
= OFF I = ON