Maintenance, Storage – Craftsman 358.792421 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Use your blower attachment for:
• Sweeping debris or grass clippings

from driveways, sidewalks, patios, etc.

• Blowing grass clippings, straw, or

leaves into piles, or removing debris

from corners, around joints, or be­
tween bricks.

Control air flow by directing the blower
discharge opening down or to one side.

Always work away from solid objects
such as walks, large stones, vehicles,

and fences.

Clean corners by starting in corners and
moving outward. This will help prevent
an accumulation of debris which could

fly into your face.

Be careful when working near plants.

The force of the air could damage ten­

der plants.

MAINTENANCE

MAINTENANCE SCHEDULE

A

WARNING: Always stop unit and disconnect spark plug wire {or discon­

nect powerhead from power source) before performing maintenanoe.

CARE AND MAINTENANCE TASK

WHEN TO PERFORM

Check for loose fasteners and parts

Before each use

Check for damaged or worn parts

Before each use

Inspect and clean unit and labels

After each use

GENERALRECOMMENDATIONS

The warranty on this unit does not cov­

er items that have been subjected to
operator abuse or negligence. To re­
ceive full value from the warranty, the
operator must maintain attachment as
instructed in this manual.
CHECK FOR LOOSE FASTENERS

AND PARTS

• Housing Screws

INSPECT AND CLEAN UNIT

AND LABELS

• After each use, inspect complete unit

for loose or damaged parts. Clean
the unit and labels using a damp

cloth with a mild detergent.

• Wipe off unit with a clean dry cloth.

STORAGE

^WARNING; Perform the following

steps after each use:
• Allow attachment to cool before stor­

ing or transporting.

• Store in a high, cool, dry, indoor area

out of reach of children.

SEASONAL STORAGE
Prepare attachment for storage at end
of season or if it will not be used for 30
days or more.

If your blower attachment is to be

stored for a period of time:

• Clean the entire unit.
• Inspect attachment for any loose or

damaged parts. Tighten any loose
screws.

• Replace any damaged, worn or bro­

ken parts.

• At the beginning of the next season,

use only fresh fuel having the proper

gasoline to oil ratio.

Advertising