Cooper Hand Tools LUFKIN LCL4 - Manual (Page 15)

Page 15
CARE & MAINTENANCE
Specifications subject to change without notice.
This device is a product of precision design and manufacture and should be treated with
care. The suggestions below will help the user fulfill any warranty obligations and also allow
the user to enjoy this product for many years.
When using the device:
Keep it and all its parts and accessories out of small children’s reach.
This laser is built to be operated under wet conditions (IEC 529;IP 54), however the unit
should always be dried off before storage.
Do not store in hot areas. High temperatures can shorten the life of electronic devices, dam-
age batteries, and warp or melt certain plastics.
Do not store in cold areas. When the device warms up to its normal operating temperature,
moisture can condense inside where it may damage circuit boards.
Although the LCL4 is dust and dirt resistant, do not store in dusty, dirty areas as long-term
exposure to these elements may damage internal moving parts.
Do not attempt to open the LCL4. Non-expert handling of the device may cause damage and
will void the warranty.
Do not drop, knock, or shake the LCL4. Rough handling can break the unit or compromise
its functionality.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the LCL4. Wipe
it with a soft cloth, slightly dampened in a mild soap and water.
Keep the laser aperture windows clean by periodically wiping them with a cotton swab
dipped in isopropyl alcohol.