Main switch and pilot lamp, Test firing – Canon 300 TL User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Main Switch and Pilot Lamp
If the pilot lamp lights up when the main switch is turned
on ("I" mark), the flash is ready for use. It is also possible
to confirm whether the fiash is charged by looking
mark in the viewfinder.
• There is no need to set the film speed because it
is transmitted from the camera body.
Test Firing
Press the pilot lamp after it has lit to test the flash. It the
flash fires, it is in proper working order
Advertising