O o (^o, Onrl – Canon 220EX User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Flash with Other Modes
When you want to control the
shutter speed to create a special
effect, use shutter speed-priority
AE. Set the desired sync speed
anywhere from 30 sec. up to the
camera maximum sync speed.
The camera sets the aperture
automatically to suit the back
ground light level. The E-TTL
autoflash control system regu
lates the flash output according
to the shutter speed you set for
optimum flash exposure.
Set the camera to Tv
(Shutter
speed-priority
AE) and set the desired
sync
speed
anywhere
from 30 sec. up to the
camera
maximum
sync
speed.
The aperture value blinks in the viewfinder to alert you of a possible over-
^ exposed or underexposed background. Change the sync speed until the
aperture value stops blinking and remains displayed.
tt
[(□e-Tfi iMCzi
PILOT
Onrl
o o (^o
Make sure that the pilot
lamp is lit.
Press the shutter button
halfway to focus on the
subject.
t 90
Check that ^ is displayed
in the viewfinder and make
sure
that
the
aperture
value is not blinking in the
viewfinder. Then, press the
shutter button completely
to take the picture.
18