Canon 420 EZ User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Correct exposure display
X-sync shutter speed
AF in-focus indicator
2
.
Flash-charge completion indicator
When both values blink, the camera is
warning that the subject is too far away.
Remove your finger from the shutter but
ton and move closer to the subject until
both values light steadily when pressed
again.
In fill-in flash, the aperture value may
start blinking: the camera is warning that
A-TTL Is impossible and the background
will be overexposed. The main subject,
however, will be correctly exposed
because normal TTL (see p.20) functions
instead of A-TTL.
R
Advertising