Clarion MAX667VD - Manual (Page 7)

7
MAX667VD
English
Owner
’s ma
nua
l
5. OUTLINE OF BUTTON AND
TOUCHKEY OPERATION
Turning the power on
∗
2
&
(POWER)
∗
1
System check
The CeNET format utilized on this unit is
provided with a system check function. When
the system check function is performed
under the following conditions, the power is
automatically turned off. Press the [ &]
(POWER) button again.
•When power is first turned on after initial
installation.
•When an external device is connected or
disconnected.
•When the [RESET] button is pressed.
∗
In addition to the above conditions, the
system check function can be performed
from the GENERAL menu in the ADJUST
mode.
∗
You can change the media
sources.
Engine ON
position
or
280QZ6070KA-00.0_EN.book Page 7 Monday, February 27, 2006 2:12 PM