Fill-in ratio control – Canon 430 EZ User Manual
Page 90
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fill-in Ratio Control
(EOS-1 and 630 only)
Previously, exposure compensation could only be
set on the camera, however, the 430EZ allows
flash exposure compensation (fill-in ratio control)
setting in 1/3 increments from -i-3 to -3.
1.
This control can only be done in the following
modes.
• Program AE
• Shutter-priority AE
• Aperture-priority AE
• Manual
2.
Set the flash to ATTL (TTL in manual).
3.
Press the plus and minus (+ and -) buttons to
set the control level. (T)
4.
Make sure that the shutter speed, aperture value
and
"V
light and then press the shutter button
completely. @
•
• This function cannot be performed on the EOS 630
if the camera is set to the green O mark.
• The amount of control appears in the viewfinder of the
EOS-1 but not in the EOS 630.
51