P: program ae, Set the shooting mode to <p, Focus the subject – Canon EOS-1D Mark IV User Manual
Page 106: Check the shutter speed and, Aperture display, H 1 b )
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P: Program AE
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
* <P>
stands for Program.
* AE stands for Auto Exposure.
Set the shooting mode to <P>.
• Press the <MODE> button and turn
the <S^lQ> dial to select
<P>.
r
1
H 1 B )
ONESHOTl
!
-3. .-2. .-1. .IB. .*1. .*2. .*3
Focus the subject.
• Look through the viewfinder and aim
the selected AF point over the subject.
Then press the shutter button halfway.
► The AF point which achieves focus
flashes in red, and the focus
confirmation light <•> in the
viewfinder’s bottom right lights, (in
One-Shot AF mode)
► The shutter speed and aperture will
be set automatically and displayed in
the viewfinder and on the top LCD
panel.
Check the shutter speed and
aperture display.
• A correct exposure will be obtained
as long as the shutter speed and
aperture display do not blink.
106