Setting the flash, Setting flash functions, 4 select [external speedlite control – Canon EOS-1D Mark IV User Manual
Page 121: Select [flash function settings, Set the flash function settings, External speedlite control, Flash function settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Flash
When an EX-series Speedlite (such as the 580EX II, 430EX II, and
270EX) settable by the camera Is attached, you can use the camera’s
menu screen to set the Speedllte's flash function settings and Custom
Functions, First attach the Speedlite to the camera and turn on the
Speedlite.
Setting Flash Functions
4 Select [External Speedlite
control].
• Under the
[Q']
tab, select
[External
Speedlite control],
then press
<
0
>.
Select [Flash function settings],
• Turn the <0> dial to select
[Flash
function settings],
then press <©>.
JPtCquabty
linage siicp
L
ftevlw tiiw
is«
Or
sltuitEt wlitioul ord
Ovn Delelt Dan
£xtprnai control
ExtSfUl Swcfflltv CQTtrd
I FUsh function sentry
fl«h CPnsettmjs
Clear alf Speedlite C.Fn's
Set the flash function settings.
• Turn the <0> dial to select a flash
function and set it as desired.
• The procedure is the same as setting
a menu function.
Q • If you press the <INFO.> button in step 3, you can revert the settings to
the default.
• With an EX-series Speedlite not settable with the camera, only
[Flash
exp. comp], [E-TTLII],
and
[Flash firing]
are settable under
[Flash
function settings],
(Certain EX-series Speedlites also enable
[Shutter sync.]
to be set.)
121