Canon EOS-1D Mark IV - Manual (Page 128)

Û Live View Shooting
INFO. About the Information Display
• Each time you press the <INFO.> button, the information display will change.
Image size------------ r' AF point (AFlBi)
White balance
Picture Style
Auto Lighting-
Optimizer
•m: Standard
•m: Low
Strong
Disable
AE lock
Shutter speed —
Flash-ready -—
Aperture -
Drive mode
Histogram
AEB
FEB
Hi: Exposure
simulation
rtigl: Standard
brightness
-Battery check
L—Highlight tone priority
ISO speed
—Shots remaining
Flash exposure compensation
Exposure level indicator----------
Upper indicator: Exposure level/AEB range
Lower indicator: Flash exposure level/FEB range
AF mode
• AFB : Live mode
• AF i: : Face detection Live mode
•
af SH: Quick mode
s
The histogram can be displayed when [Expo, simulation: Enable]
(p.130) has been set.
By setting
[.W.C.Fn IV -15: Add aspect ratio Information] to setting 1 to
6, you can shoot with the same framing as with a medium- or large-
format film camera such as 6x6cm, 6x4.5cm, and 4x5 inch. Vertical lines
matching the set aspect ratio will be displayed (p.234).
When <HB> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <Mi> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low or bright light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <HÎ> icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low- or bright-light conditions.
128