Focus the subject, Take the picture – Canon EOS-1D Mark IV User Manual
Page 137
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using AF to Focus
Focus the subject.
• Aim the AF point over the subject and
press the shutter button halfway.
► The Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed.
► When focus is achieved, the beeper
will sound and the AF point will be
displayed in red. (If automatic AF
point selection has been set, the AF
point which achieves focus will flash
in red.)
► The Live View image will
automatically reappear.
Magnifying irame
Take the picture.
• Check the focus and exposure, then
press the shutter button completely to
take the picture (p.127).
a
You cannot take a picture during autofocusing. Take the picture only while
the Live View image is displayed.
137