Canon EOS-1D Mark IV - Manual (Page 161)

Magnified View
Magnified area position
You can magnify the image by 1.5x to lOx on the LCD monitor
Magnify the image.
• During image playback, press the
<£t> button.
► The image will be magnified
• If you hold down the < St. > button, the
image will continue to be magnified until
it reaches the maximum magnification.
• To reduce the magnification, press
the <Q,> button If you hold down the
button, the magnification will continue
to reduce to the single image display.
Scroll around the image.
• Use to scroll around the
magnified image.
• To exit the magnified display, press the < [El >
button and the single image display will return.
Magnified View’s Starting Position
Normally, the magnified view starts at the image center. When the [E'
Enlarge display] menu option is set to [Enlarge from selected AF
point], the magnified view starts at the selected AF point. This is
convenient for quickly checking the focus.
Q • While in the magnified view, you can keep the same magnified area and
magnification when you turn the <0=* dial to view another image.
• In the case of images shot with automatic AF point selection or with
manual focus
<MF>,
the magnification will start at the image center.
• Magnified view is not possible during the image review immediately after
the image is taken
• With [Enlarge from selected AF point]
• The starting magnification varies depending on the image size that was set.
• If C.Fn III -8-1/2/3 is set, the focusing point area will be expanded and the
magnified view starts from the AF point that actually achieved focus. Therefore,
the view may not be magnified from the manually-selected AF point.
• A movie cannot be magnified.
161