Automatic sensor cleaning, Cleaning the sensor now, I select [sensor cleaning – Canon EOS-1D Mark IV User Manual
Page 184: Select [clean now to, Select [ok, Disabling automatic sensor cleaning, Cleaning the sensor now i select [sensor cleaning, Aselect [clean now to
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic Sensor Cleaning
Whenever you set the power switch to <ON/J> or <OFF>, the Self Cleaning
Sensor Unit operates to automatically shake off any dust on the front of the
sensor. Normally, you need not pay attention to this operation. However, you
can execute the sensor cleaning at anytime as well as disable it.
Cleaning the Sensor Now
I Select [Sensor cleaning].
• Under the tab, select [Sensor
cleaning], then press
<
0
>.
Save/load settings on media
fiegist/apply
bask
settings
Clear all camera settings
Copyright information
Sensor cleaning
Clean sensor with cleaning
function of camera
a
Select [Clean now to*]-
• Turn the <Q> dial to select [Clean
now.th], then press <0>.
Select [OK].
• Turn the
<
0
> dial to select [OK],
then press <0>.
► During the sensor cleaning, the
< T
q
> icon will be displayed on the
LCD monitor. When the cleaning
ends, the screen will return to step 2.
During the sensor cleaning, the shutter will make three shutter-release
sounds. The camera is not taking pictures.
For best results, do the sensor cleaning while the camera bottom is
placed on a table or other flat surface.
Even if you repeat the sensor cleaning, the result will not improve that
much. Right after the
sensor
cleaning is finished, the
[Clean now,t>]
option will remain disabled temporarily.
Disabling Automatic Sensor Cleaning
• In step 2, select [Auto cleaning ,ti»] and set it to [Disable],
► The sensor cleaning will no longer be executed when you set the
power switch to <ON/J> or <OFF>.
184