Preparing to print, Connecting the camera to a printer, Set the camera’s power switch to <off – Canon EOS-1D Mark IV User Manual
Page 190: Set up the printer, Turn on the printer, C set the camera’s power switch to <on
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparing to Print
The direct printing procedure is done entireiy with the camera
while you look at the LCD monitor.
Connecting the Camera to a Printer
Set the camera’s power switch to
<OFF>.
^ Set up the printer.
m For details, see the printer's
instruction manual.
Connecting the camera to a
printer
• Use the interface cable provided with
the camera.
• When connecting the cable plug to
the<A/V OUT/DIGITAL> terminal,
the cable plug’s <*^> icon must face
the back of the camera.
• To connect to the printer, refer to the
printer’s instruction manual.
Turn on the printer.
C Set the camera’s power switch to
<ON>.
► Some printers may make a beeping
sound.
190