C.fn ii -3 highlight tone priority, C.fn ii -4 auto lighting optimizer, C.fn ii -5 e-ttl ii flash metering – Canon EOS-1D Mark IV User Manual
Page 215: Auto lighting optimizer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Custom Function Settings
C.Fn II -3 Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail. The dynamic range is expanded from the
standard 18% gray to bright highiights. The gradation between the grays
and highlights becomes smoother.
» With setting 1, noise may be slightly more pronounced than usual.
With setting 1, the settable ISO speed range will be 200 -12800.
Also,
<D+>
will be displayed on the top LCD panel and in the viewfinder.
C.Fn II -4 Auto Lighting Optimizer
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically.
For details on the Auto Lighting Optimizer, see page 81.
0: Standard
2: Strong
1: Low
3; Disable
C.Fn II -5 E-TTL II flash metering
0: Evaluative flash metering
Fully automatic flash photography for all conditions, from low light to
daylight fill-flash.
1: Average flash metering
The entire metered area is averaged. Since automatic flash exposure
compensation will not be executed, you may have to set it yourself
depending on the scene. This also applies if you use FE lock.
215