C.fn iv -13 timer length for timer, C.fn iv *14 shortened release time lag – Canon EOS-1D Mark IV User Manual
Page 233
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Custom Function Settings
C.Fn IV -13 Timer length for timer
How long the function setting remains in effect after you let go of the
respective button can be changed.
Disable:
The timer length is set to the default.
Enable:
The timer length is set to the time set with
[Register].
Register:
You can set the 6-sec. and 16-sec. timer length and the timer
length after the shutter release. The timer length can be set to 0
sec. to 59 sec. or 1 min. to 60 min. After entering the settings,
select
[Apply].
• 6 sec. timer
This timer length will apply to the AE lock started with the
metering timer/<-)(-> button.
• 16 sec. timer
This timer length will apply to multi-spot metering and FE lock
with the <FEL> button.
• Timer after release
Normally, the timer length is 2 sec. after the shutter release. A
longer timer length will make it easier to keep using AE lock for
the same exposure.
C.Fn IV *14 Shortened release time lag
Normally, stabilization control is executed for the shutter-release time lag.
This stabilization control can be omitted to make the shutter-release time
lag shorter.
0: Disable
1: Enable
When the aperture is stopped down to no more than 3 stops from the
maximum aperture, the shutter-release time lag will be as much as
approx. 20% shorter than nomtal.
233