Registering and applying basic camera settings, Registering basic settings, Select [regist/apply basic – Canon EOS-1D Mark IV User Manual
Page 240: Settings, Select [register, Select a function, Set the function as desired, Exit the setting, Applying basic settings, Select [regist/apply basic settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Registering and Applying Basic Camera Settings ■
You can set the basic settings of major functions such as the shooting mode,
AF mode, metering mode, and drive mode and register them in the camera.
This is convenient when you want to instantiy switch to frequently-used
shooting settings.
Registering Basic Settings
Save/loaa settings on media
S Regist/apply basic settings
Ciear all camera settings
Copyright information
Sensor cleaning
Firmware Ver, l.O.O
Register basic camera settings
Select [Regist/apply basic
settings].
m Under the [fri] tab, select [Regist/apply
basic settings], then press
<
0
>.
Select [Register].
• Turn the <Q> dial to select
[Register], then press <©>.
Select a function.
• Turn the <0> dial to select the
function, then press <@>.
• Up to nine settings such as the
shooting mode, white balance, and
drive mode can be set.
Set the function as desired.
• Turn the <0> dial to select the
desired setting, then press <@>.
Exit the setting.
• To exit the setting and return to the screen
in step 2, press the <MENU> button.
Applying Basic Settings
In step 2, select [Apply]. The camera settings will switch to the registered settings.
@ [Record func.] will also be set to [Standard], and the exposure
compensation, AEB, flash exposure compensation, and WB correction/BKT
will all be canceled.
240