Y| set the power switch to <on, Lodosaa – Canon EOS-1D Mark IV User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and Removing the Card
Shots remaining
_L
ISO
R
r OfSiHOTl
cc
1 ° 1
nwfji
-2. ‘1. .O. .*2. f3
Card selection Icon
CF card Indicator
SD card Indicator
y| Set the power switch to <ON>.
► The number of remaining shots wiil
be dispiayed on the top LCD panei
and in the viewfinder.
► The rear LCD panel wili indicate
which card(s) has been instailed.
The
images will be recorded to the card
with the < ^ > arrow next to the
respective card’s indicator.
nil |il
L
lODOsaa
Q • SDHC memory cards can be used with the camera.
• Although the thickness is different between the two types of
CF (CompactFlash) cards, either one can be inserted into the
camera.
• Ultra DMA (UDMA) CF cards and hard disk-type cards can also be used
with the camera. UDMA CF cards enable faster data writing.
• The number of possible shots varies depending on the card's capacity,
image-recording quality, ISO speed, etc.
• Setting the
[O’ Release shutter without card]
menu option to
[Disable]
will prevent you from forgetting to install a card (p.52).
37