Canon EOS-1D Mark IV - Manual (Page 75)

I Custom White Balance
Register image on card
First follow step 4 under “Capture and register the image” (p.73,
74)
to take a picture of a plain, white object. This image saved in
the card can then be registered for Custom WB. The procedure up
to step 2 is the same as with "Capture and register the image”.
<1 Select [Custom WB regist.].
^ Select the Custom WB No. to be
registered.
Select [Register image on card].
• Turn the <0> diai to seiect [Register
image on card], then press <@>.
► The images saved in the card wili be
displayed.
Select the image to be used for
registrating the Custom WB data.
• You can also display a four- or nine-image
index by pressing the <<9. > button
• Turn the <0> dial to select the
image to be registered for the Custom
WB data, then press <@>.
Select [OK].
• Turn the <0> dial to select [OK],
then press <©>.
The Custom WB data will be registered.
When the message appears, press
<©> to return to step 3.
• To use the Custom WB, see “Selecting and
Shooting with the Custom WB data" (p.76),
y If the image was captured while the Picture Style was set to [Monochrome]
(p 67), it cannot be selected in step 4.
75
Use W0 SW from ttsj im»ae
tor Cistom WBi
Ur«xi 0*