Dtspia, Program – Canon 166 A User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
[Error in Display]
The
aperture
displayed
may
be
one-half
f/stop off the one selected on the flash
This is because the aperturb dispiay is in
one-half f/stop increments; it has no effect
on
actual
exposure
The
aperture
display
may also flash on and off if the flash-
selected aperture is the same as the lens'
maximum aperture In this case, exposure
will be correct, but it is advisabie to check
the fiash-seiected aperture to make sure it
is not iarger than the iens' maximum aper
ture
(
a
E-1
program
Dtspia^
Full Autoflash Mode: FD lens on "A"
and shutter speed selector dial not on
“B."
19
Advertising