0qse) taking pictures in auto flash mode, Set the focus, Compose the shot and take the picture – Canon SURE SHOT 105 ZOOM S User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0QSE) Taking Pictures in Auto Flash Mode
In this mode, the AiAF function (-> 47) ensures that
the subject stays in focus even when it is not exactly in
the center of the viewfinder The flash also fires
automatically in low light or backlit conditions.
1
Set the focus.
• Position the AF frame over
your subject and press the
shutter button halfway
^ When the subject is in
focus, the green indicator
lights
• When the flash fires
automatically, the orange
indicator lights. (-> 21)
• Keep the shutter button
pressed halfway down
Compose the shot and
take the picture.
• Press the shutter button
down fully.
• Press the shutter button
slowly and gently.
^The photograph is taken.
41
There is a very short delay between the shutter button
being pressed and the shutter releasing. In general,
you should continue to hold the camera still until you
hear the sound of the film winding on, which indicates
that the shot has been taken.
i
You can take a picture using the Realtime Release
mode, in which the shutter is released instantly, if you
set the dial to 01 (-> 28).
11-20