Canon DR-5060F - Manual (Page 67)

65
Setting Detailed Scan Conditions
3
Setting Scan Conditions
Separation
The Separation panel is for making settings for separating the scanned image to file
or on film.
Separation
Set the file and film separators.
[Auto New File]
When this check box is marked, the New File key on the operation panel lights
once scanning is discontinued. The file separator signal is then generated to
separate the file, and the film is marked with a file mark. (See “About
Separators” P. 21)
[2LevelBlip]
When this check box is marked, the film is marked with a file mark when a file
is separated. (See “About Separators” P. 21)
[Patch Code]
Open the Patch Code Settings dialog box. This button is enabled when the
optional patch code/function sheet detector is attached.
(See “Patch Code Settings” P. 78)
[Default] button
Returns the settings in the Separation panel to their defaults.
[OK] button
Enables the settings and closes the dialog box.
[Cancel] button
Cancels any settings you have set, and closes the dialog box.