Cortelco DISPOSITION PLUS 2200 - Manual (Page 17)

17
RECEIVING CALLS
1.
When the telephone is not in use and a new call is received, the display will show
the NEW symbol, the phone number, the caller s name, and time and date of the call
for 20 seconds. The RPT (repeat) symbol will appear if the call has come in more
than once.
2. After 20 seconds with no activity, the display will default to the Stand-By screen
and remain on until another call is received or a button is pressed.
REVIEWING CALLS
1.
When the NEW symbol is flashing on the Stand-By screen, you have new incoming
calls. Press the REVIEW UP ( ) or REVIEW DOWN ( ) button to review the
stored calls.
2. The NEW symbol attached to each call will be removed after you review the call.
3. If the NEW symbol is still flashing when the display goes back to the Stand-By
screen, there are new calls that have not yet been reviewed.
4. The reviewed number can be stored into any of the auto memory buttons by first
pressing the STORE button and then one of the memory buttons
5. When you have reached the end of the call records, the display will indicate [-END
OF LIST- ] , confirming there are no more calls stored.
Note: If the telephone number received is more than 10 digits, the unit will only store
the first 10 digits into memory.
AM 8:59 8/24
NEW
06
765-555-1234
JOHN SMITH
RPT
CALL#
REPEAT SYMBOL
NEW SYMBOL
AM 8:59 8/24
NEW
05
TOTAL CALLS 06
CALL#
AM 8:59 8/24
NEW
06
TOTAL CALL 08
NEW SYMBOL
TOTAL NEW CALLS