AItech MaxView Cinema Kit - Manual (Page 4)

Connections:
• Check the power connection to the scan converter.
• Check the connections from the scan converter to the PC.
• Check the connections from the scan converter to the TV.
TV (or VCR):
• RCA connections to a TV or VCR must be to the Video Input (yellow)
connector.
• If you are connected directly to a TV with a S-Video or RCA cable, ensure
that the TV has been configured to accept auxiliary video input.
• If you are connected to the TV through a VCR, ensure that the TV and VCR
have been configured to accept auxiliary video input.
An input button on the TV or VCR’s original remote control often sets the video
input mode. This mode is needed for both S-Video and RCA video connections.
The button may be marked Video, Video-1, Aux, Input, Vid, Line, Line-In,
TV/VCR, etc. On some TV’s and VCR’s this setting is made by selecting Channel
2, then pressing the Down Channel button. If this does not work, refer to your TV
(or VCR) owner’s manual.
Settings: Check that the computer’s Display Settings are set correctly.
o 640x480 at 60-85Hz
o 800x600 at 60-75Hz
o 1024x768 at 60-70Hz
Laptops: Laptops must be set to External-only or Simultaneous VGA display
mode. This is usually done with a hot-key combination (Fn + function key). Refer
to your laptop manual for further details.
Still Having Problems:
• Check our Web site
www.aitech.com for more information.
AITech International Corporation
Website: http://www.aitech.com
© 2007 AITech International Corporation
HELP!! I CAN'T SEE
ANYTHING ON MY TV!