AItech ProPC/TV Wireless - Manual (Page 11)

10
Interference in the Image and Sound
• The ProPC/TV Wireless can transmit on four different channels. Try all four channels (set on Transmitter and Receiver) to find the cleanest, most
interference-free channel in your area.
• Move your Transmitter and Receiver slightly to find the best reception position. Sometimes just moving them an inch or two will make a big difference in
reception quality.
• Shorten the distance between your sender and receiver.
• Microwave ovens, wireless home networking equipment and 2.4 GHz cordless phones all operate on the same frequency as the ProPC/TV Wireless, and may
cause interference. Try turning them off to eliminate interference.
• Make sure your Transmitter and Receiver are on the same channel.
• Picture on TV is too bright: If you are not connecting a PC monitor to the T-shaped VGA Bypass Cable, terminate the connection by attaching the 75 Ohm Load
Terminator to the Pass-Thru connector.
6. Specifications
Transmitter
VIDEO Input Level： 1Vp-p, supports PAL and NTSC format
AUDIO Input Level： 1Vp-p, stereo
Antenna： Dipole
Operating Temperature： -10
° to +60°
VIDEO Output Formant： PAL and NTSC format
2.4GHz wireless transmission：
Frequency: 2400MHz - 2483MHz
Transmission Power: 10dBm
Channel Number: 4 (2414, 2432, 2450, 2468MHz）
Frequency Stability: +-100KHz
Receiver
VIDEO Output Level： 1Vp-p
AUDIO Output Level： 1Vp-p, Stereo
Antenna： Dipole
2.4GHz Wireless Transmission：
Frequency 2400MHz—2483MHz
Receiver Sensitivity -85dBm
Channel Number: 4（2414，2432，2450，2468MHz）
Frequency Stability: +-100KHz
Warranties