Alumax 341 Side Panel - Manual (Page 6)

EPH-N00-06062
2-3-00
Page 6 of 6
10
Caulk both ends of the tub track [A A A A A] where it
meets the wall jambs [B B B B B] and the interior edge of the
wall jambs as shown. Run a bead of caulking along the
interior edge of the tub track.
Caulk the interior and exterior sides of the base of the
inline panel [JJJJJ].
NOTE: We recommend that you let the caulk cure
for 24 hours before using your new enclosure.
See primary instruction sheet for cleaning instructions.