Alumax 700c - Manual (Page 7)

Page 7 of 7 EPH-N00-06077
6-3-02
10
Neatly caulk the inside perimeter of the shower
curb and the hinge and strike jambs.
NOTE: Improper caulking will result in leaks.
NOTE: The caulking should be allowed to cure for
twenty-four hours before using your new shower
enclosure.
The Care and Cleaning of your new A LUMAX Bath Enclosure. The simplest and preferred
method of cleaning your unit is by washing it with clean water and drying with a soft cloth.
If soil is still present after drying, a non-abrasive cleanser with a pH of seven to eight may be
used. Comet Bathroom Cleaner
® has been tested and is recommended by the Bath Enclosure
Manufacturers Association (BEMA). Do not use scouring pads, sharp instruments, or acid-
based cleansers to clean the unit.
Thank you for choosing an A LUMAX Bath Enclosure. Please take a moment to complete
and return the enclosed Customer Response Card. The information you provide helps us
improve the quality of our products and provide better service to you, our customer.