Alumax L-312 User Manual
Page 16
INSTALLATION MANUAL
201X, 202X, 311X, 312X, 311TBX, 312TBX
1
16
FIXED PANEL INSTALLATION
THIS INSTALLATION PROCEDURE APPLIES FOR
ALL RETURN PANELS INSTALLATION REGARD-
LESS OF QUANTITY OR ADDITIONAL FIXTURE
SUCH AS TOWEL BAR.
Using a measuring tape, mark the center of the
threshold of the base.
Using the marking established in the previous
step, run a second line up the wall. Use a level
to ensure verticality of this line.
Place the wall jamb (3) onto the wall while
ensuring that the wall jamb slotted holes are
centered to the center line. The side with holes
of the wall jamb should face the interior of the
shower.
Drill holes using a Ø1/8˝ drill bit, through the
wall using the wall jamb slotted holes as refer-
ence.
Insert a drop of silicone into each hole made in
the previous step. Insert a wall plug (11.1) into
each hole and from there the wall jamb can be
repositioned and permanently fastened using
self drilling screws #8-1 1/4 (11.3).
1a.
1b.
1c.
1d.
1a
1b
1d
1c
11.3
11.1
3
INTERIOR
SHOWER SIDE
3