Specifications – Cub Cadet 48-inch User Manual
Page 8
8
SPECIFICATIONS
GENERAL INFO.
Controls:
Engine ignition and start switch; throttle; choke; left and right
steering levers; electric blade clutch switch; parking brake;
mower deck lift
Parking Brake:
Mechanical linkage brake handle to internal drum brakes
Seat:
Adjustable seat and armrests. 5" Adjustment (fore-aft)
Frame:
2" Steel structural tube and plate, all welded construction
Instrumentation
Hour meter, Tachometer, Maintenance-minder
Front Caster Wheels:
48” deck, 13 x 5.0 - 6; 54”, 60”, & 72” deck, 13 x 6.50 - 6
Drive Wheels:
48” deck, 23 x 9.50 - 12; 54”, 60", & 72” deck, 24 x 12 - 12
Tire Pressure:
8-10 psi Rear, 20-25 psi front caster
Fuel Tank:
Two 6.5 gallon w/individual shutoff valves
Ground Speed:
0-12 + MPH forward. 0-5 MPH reverse
Net Weight:
950 lbs w/48" deck, 980 lbs. w/54" deck, 1070 lbs. w/60" deck,
1330 lbs w/72” deck
ENGINE INFO.
Engine:
23 & 25HP Kawasaki, 27HP Kohler, & 33HP Generac
Type:
Vertical crankshaft air cooled V-Twin
Air Cleaner:
Dual Paper Element with rain cap
Lube System:
Pressurized with oil filter
Hydraulic System:
In tank filter, 3 quart capacity
Starter:
12-volt electric
Blade Brake Clutch:
Electric
TRACTION DRIVE INFO.
Traction Drive:
Engine to two variable-output hydraulic pumps each connected to
individual wheel motors
CUTTER DECK INFO.
Cutter Deck;Drive:
48", 54", 60", & 72” Belt Driven
Deck Lift:
Hand lever w/pin lock for height adjustment
Cutting Height:
1-1/2" to 5" in 1/4” increments
No. of Blades
3, belt-driven, power take-off from engine