Appendix, Recovering nvr/dvr system through the usb port – AVer E5000 series User Manual
Page 188
179
Appendix Recovering NVR/DVR System
through the USB port
Save the firmware on USB pen drive and through the USB port on DVR unit to recovery the
firmware of DVR system. All the configuration will be erased after recovery process.
1. Download the firmware from website
>> Support >>
download Center >> Embedded hybrid DVR >> E5016 >> firmware. Then, click Search
button to search firmware.
2. After download the firmware file, un-zip the file and save on USB pen drive.
[Note] Copy the entire firmware file folder into USB pen drive.
3. Power off the DVR system.
4. Plug the USB pen drive that contains recovery firmware into USB port that is located in
front of DVR unit (upper one).
5. Then, power on DVR unit. While the DVR is reading file, the screen is black. Please wait for
a System Recovery Procedure window to show up.
6. When System Recovery Procedure window show up, click Yes to continue it. If user wants
to cancel the firmware upgrade procedure, click No.